View MC79L0006_751397.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MC79L00, MC79L00A Series 100 mA Negative Voltage Regulators
The MC79L00, A Series negative voltage regulators are inexpensive, easy-to-use devices suitable for numerous applications requiring up to 100 mA. Like the higher powered MC7900 Series negative regulators, this series features thermal shutdown and current limiting, making them remarkably rugged. In most applications, no external components are required for operation. The MC79L00 devices are useful for on-card regulation or any other application where a regulated negative voltage at a modest current level is needed. These regulators offer substantial advantage over the common resistor/Zener diode approach.
Features http://onsemi.com
THREE-TERMINAL LOW CURRENT NEGATIVE FIXED VOLTAGE REGULATORS
MARKING DIAGRAMS
Pin 1. 2. 3. 1 4. SOIC-8 5. D SUFFIX 6. CASE 751 7. 8. Vout Vin Vin NC GND Vin Vin NC 8 9Lxxx ALYW G 1
* * * * * *
No External Components Required Internal Short Circuit Current Limiting Internal Thermal Overload Protection Low Cost Complementary Positive Regulators Offered (MC78L00 Series) Pb-Free Packages are Available
8
Pin 1. Ground 2. Input 3. Output GND R 5 R18 R6 R8 Q10 Q5 Q4 R7 Q8 Q1 R2 Z1 R3 C Q6 R10 R11 Q7 Q2 Q11 R14 R15 Input * Automotive temperature range selections are available with special test conditions and additional tests in 5, 12 and 15 V devices. Contact your local ON Semiconductor sales office for information. Q14 Q9 R4 Q12 Q13 R16 Output R9 R17 1 2 3 TO-92 P SUFFIX CASE 29
MC79L xxxxx ALYWWG G
R1
xxx = Specific Device Code A = Assembly Location L = Wafer Lot Y = Year W, WW = Work Week y = B or C G = Pb-Free Package (Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet.
Figure 1. Representative Schematic Diagram
(c) Semiconductor Components Industries, LLC, 2006
1
October, 2006 - Rev. 8
Publication Order Number: MC79L00/D
MC79L00, MC79L00A Series
MAXIMUM RATINGS (TA = +25C, unless otherwise noted.)
Rating Input Voltage (-5 V) (-12, -15, -18 V) (-24 V) Symbol VI Value -30 -35 -40 Unit Vdc
Power Dissipation Case 29 (TO-92 Type) TA = 25C Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case Case 751 (SOIC-8 Type) (Note 1) TA = 25C Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case Storage Temperature Range Junction Temperature
PD RqJA RqJC PD RqJA RqJC Tstg TJ
Internally Limited 160 83 Internally Limited 180 45 -65 to +150 +150
W C/W C/W W C/W C/W C C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. SOIC-8 Junction-to-Ambient Thermal Resistance is for minimum recommended pad size. Refer to Figure 9 for Thermal Resistance variation versus pad size. *This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL_STD_883, Method 3015 Machine Model Method 200 V.
ELECTRICAL CHARACTERISTICS (VI = -10 V, IO = 40 mA, CI = 0.33 mF, CO = 0.1 mF, -40C < TJ +125C (for MC79LXXAB),
0C < TJ < +125C (for MC79LXXAC)). MC79L05C, AB Characteristics Output Voltage (TJ = +25C) Input Regulation (TJ = +25C) -7.0 Vdc VI -20 Vdc -8.0 Vdc VI -20 Vdc Load Regulation TJ = +25C, 1.0 mA IO 100 mA 1.0 mA IO 40 mA Output Voltage -7.0 Vdc VI -20 Vdc, 1.0 mA IO 40 mA VI = -10 Vdc, 1.0 mA IO 70 mA Input Bias Current (TJ = +25C) (TJ = +125C) Input Bias Current Change -8.0 Vdc VI -20 Vdc 1.0 mA IO 40 mA Output Noise Voltage (TA = +25C, 10 Hz f 100 kHz) Ripple Rejection (-8.0 VI -18 Vdc, f = 120 Hz, TJ = +25C) Dropout Voltage (IO = 40 mA, TJ = +25C) Symbol VO Regline - - Regload - - VO -4.5 -4.5 IIB - - IIB - - Vn RR |VI-VO| - 40 - - - 40 49 1.7 1.5 0.2 - - - - - - 41 - - - 40 49 1.7 1.5 0.1 - - - mV dB Vdc - - 6.0 5.5 - - - - 6.0 5.5 mA - - -5.5 -5.5 -4.75 -4.75 - - -5.25 -5.25 mA - - 60 30 - - - - 60 30 Vdc - - 200 150 - - - - 150 100 mV Min -4.6 Typ -5.0 Max -5.4 MC79L05AC, AB Min -4.8 Typ -5.0 Max -5.2 Unit Vdc mV
http://onsemi.com
2
MC79L00, MC79L00A Series
ELECTRICAL CHARACTERISTICS (VI = -19 V, IO = 40 mA, CI = 0.33 mF, CO = 0.1 mF, -40C < TJ +125C (for MC79LXXAC),
0C < TJ < +125C (for MC79LXXAB)). MC79L12C, AB Characteristics Output Voltage (TJ = +25C) Input Regulation (TJ = +25C) -14.5 Vdc VI -27 Vdc -16 Vdc VI -27 Vdc Load Regulation TJ = +25C, 1.0 mA IO 100 mA 1.0 mA IO 40 mA Output Voltage -14.5 Vdc VI -27 Vdc, 1.0 mA IO 40 mA VI = -19 Vdc, 1.0 mA IO 70 mA Input Bias Current (TJ = +25C) (TJ = +125C) Input Bias Current Change -16 Vdc VI -27 Vdc 1.0 mA IO 40 mA Output Noise Voltage (TA = +25C, 10 Hz f 100 kHz) Ripple Rejection (-15 VI -25 Vdc, f = 120 Hz, TJ = +25C) Dropout Voltage (IO = 40 mA, TJ = +25C) Symbol VO Regline - - Regload - - VO -10.8 -10.8 - - - - - - - - 80 42 1.7 - - 250 200 100 50 -13.2 -13.2 - - - - -11.4 -11.4 - - - - - - - - - - 80 42 1.7 250 200 100 50 -12.6 -12.6 mV Min -11.1 Typ -12 Max -12.9 MC79L12AC, AB Min -11.5 Typ -12 Max -12.5 Unit Vdc mV
Vdc
IIB - - IIB - - Vn RR |VI-VO| - 36 - 6.5 6.0 1.5 0.2 - - - - - - - - 37 - 6.5 6.0 1.5 0.2 - - -
mA
mA
mV dB Vdc
ELECTRICAL CHARACTERISTICS (VI = -23 V, IO = 40 mA, CI = 0.33 mF, CO = 0.1 mF, -40C < TJ +125C (for MC79LXXAB),
0C < TJ < +125C (for MC79LXXAC)). MC79L15C Characteristics Output Voltage (TJ = +25C) Input Regulation (TJ = +25C) -17.5 Vdc VI -30 Vdc -20 Vdc VI -30 Vdc Load Regulation TJ = +25C, 1.0 mA IO 100 mA 1.0 mA IO 40 mA Output Voltage -17.5 Vdc VI -Vdc, 1.0 mA IO 40 mA VI = -23 Vdc, 1.0 mA IO 70 mA Input Bias Current (TJ = +25C) (TJ = +125C) Input Bias Current Change -20 Vdc VI -30 Vdc 1.0 mA IO 40 mA Output Noise Voltage (TA = +25C, 10 Hz f 100 kHz) Ripple Rejection (-18.5 VI -28.5 Vdc, f = 120 Hz) Dropout Voltage IO = 40 mA, TJ = +25C Symbol VO Regline - - Regload - - VO -13.5 -13.5 IIB - - DIIB - - VN RR |VI-VO| - 33 - - - 90 39 1.7 1.5 0.2 - - - - - - 34 - - - 90 39 1.7 1.5 0.1 - - - mV dB Vdc - - 6.5 6.0 - - - - 6.5 6.0 mA - - -16.5 -16.5 -14.25 -14.25 - - -15.75 -15.75 mA - - 150 75 - - - - 150 75 Vdc - - 300 250 - - - - 300 250 mV Min -13.8 Typ -15 Max -16.2 MC79L15AC, AB Min -14.4 Typ -15 Max -15.6 Unit Vdc mV
http://onsemi.com
3
MC79L00, MC79L00A Series
ELECTRICAL CHARACTERISTICS (VI = -27 V, IO = 40 mA, CI = 0.33 mF, CO = 0.1 mF, 0C < TJ > +125C, unless otherwise noted).
MC79L18C Characteristics Output Voltage (TJ = +25C) Input Regulation (TJ = +25C) -20.7 Vdc VI -33 Vdc -21.4 Vdc VI -33 Vdc -22 Vdc VI -33 Vdc -21 Vdc VI -33 Vdc Load Regulation TJ = +25C, 1.0 mA IO 100 mA 1.0 mA IO 40 mA Output Voltage -20.7 Vdc VI -33 Vdc, 1.0 mA IO 40 mA -21.4 Vdc VI -33 Vdc, 1.0 mA IO 40 mA VI = -27 Vdc, 1.0 mA IO 70 mA Input Bias Current (TJ = +25C) (TJ = +125C) Input Bias Current Change -21 Vdc VI -33 Vdc -27 Vdc VI -33 Vdc 1.0 mA IO 40 mA Output Noise Voltage (TA = +25C, 10 Hz f 100 kHz) Ripple Rejection (-23 VI -33 Vdc, f = 120 Hz, TJ = +25C) Dropout Voltage IO = 40 mA, TJ = +25C Symbol VO Regline - - - - Regload - - VO - -16.2 -16.2 - - - - - - - - - - 150 46 1.7 170 85 - -19.8 -19.8 - - -17.1 - -17.1 - - - - - - 33 - - - - - - - - - - - 150 48 1.7 170 85 Vdc -18.9 - -18.9 mA - - IIB - - - Vn RR |VI-VO| - 32 - - 1.5 0.2 - - - 1.5 - 0.1 - - - mV dB Vdc 6.5 6.0 6.5 6.0 mA - - - - - 325 275 - - - - - - - - - 325 - - 275 mV Min -16.6 Typ -18 Max -19.4 MC79L18AC Min -17.3 Typ -18 Max -18.7 Unit Vdc mV
IIB
ELECTRICAL CHARACTERISTICS (VI = -33 V, IO = 40 mA, CI = 0.33 mF, CO = 0.1 mF, 0C < TJ < +125C, unless otherwise noted).
MC79L24C Characteristics Output Voltage (TJ = +25C) Input Regulation (TJ = +25C) -27 Vdc VI -38 Vdc -27.5 Vdc VI -38 Vdc -28 Vdc VI -38 Vdc Load Regulation TJ = +25C, 1.0 mA IO 100 mA 1.0 mA IO 40 mA Output Voltage -27 Vdc VI -38 V, 1.0 mA IO 40 mA -28 Vdc VI -38 Vdc, 1.0 mA IO 40 mA VI = -33 Vdc, 1.0 mA IO 70 mA Input Bias Current (TJ = +25C) (TJ = +125C) Input Bias Current Change -28 Vdc VI -38 Vdc 1.0 mA IO 40 mA Output Noise Voltage (TA = +25C, 10 Hz f 100 kHz) Ripple Rejection (-29 VI -35 Vdc, f = 120 Hz, TJ = +25C) Dropout Voltage IO = 40 mA, TJ = +25C Symbol VO Regline - - - Regload - - VO - -21.4 -21.4 IIB - - DIIB - - Vn RR |VI-VO| - 30 - - - 200 43 1.7 1.5 0.2 - - - - - - 31 - - - 200 47 1.7 1.5 0.1 - - - mV dB Vdc - - 6.5 6.0 - - - - 6.5 6.0 mA - - - - -26.4 -26.4 -22.8 - -22.8 - - - -25.2 - -25.2 mA - - 200 100 - - - - 200 100 Vdc - - - - 350 300 - - - - - - 350 - 300 mV Min -22.1 Typ -24 Max -25.9 MC79L24AC Min -23 Typ -24 Max -25 Unit Vdc mV
http://onsemi.com
4
MC79L00, MC79L00A Series
APPLICATIONS INFORMATION
Design Considerations
The MC79L00, A Series of fixed voltage regulators are designed with Thermal Overload Protections that shuts down the circuit when subjected to an excessive power overload condition, Internal Short Circuit Protection that limits the maximum current the circuit will pass. In many low current applications, compensation capacitors are not required. However, it is recommended that the regulator input be bypassed with a capacitor if the regulator is connected to the power supply filter with long wire length, or if the output load capacitance is large. An input bypass capacitor should be selected to provide good
high-frequency characteristics to insure stable operation under all load conditions. A 0.33 mF or larger tantalum, mylar, or other capacitor having low internal impedance at high frequencies should be chosen. The bypass capacitor should be mounted with the shortest possible leads directly across the regulator's input terminals. Normally good construction techniques should be used to minimize ground loops and lead resistance drops since the regulator has no external sense lead. Bypassing the output is also recommended.
Input +Vin 0.33mF MC78LXX 0.1mF +VO CI* 0.33mF
MC79LXX CO** 0.1mF
Output
0.1mF -Vin 0.33mF MC79LXX -VO A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0 V above the output voltage even during the low point on the ripple voltage. * CI is required if regulator is located an appreciable * distance from the power supply filter ** CO improves stability and transient response.
Figure 2. Positive and Negative Regulator
Figure 3. Standard Application
http://onsemi.com
5
MC79L00, MC79L00A Series
TYPICAL CHARACTERISTICS
(TA = +25C, unless otherwise noted.)
V I -V O , INPUT/OUTPUT DIFFERENTIAL VOLTAGE (V) 8.0 VO, OUTPUT VOLTAGE (V) MC79L05C VO = -5.0 V TJ = 25C IO = 1.0 mA IO = 100 mA -2.5 -2.0 -1.5 IO = 1.0 mA -1.0 -0.5 0 Dropout of Regulation is defined when DVO = 2% of VO
6.0
IO = 70 mA IO = 40 mA
4.0
2.0 IO = 40 mA 0
0
-2.0
-4.0 -6.0 Vin, INPUT VOLTAGE (V)
-0.8
-10
0
25
50 75 100 TJ, JUNCTION TEMPERATURE (C)
125
Figure 4. Dropout Characteristics
Figure 5. Dropout Voltage versus Junction Temperature
4.2 I IB , INPUT BIAS CURRENT (mA) 4.0 3.8 3.6 3.4 3.2 3.0 0 0 MC79L05C Vin = -10 V VO = -5.0 V IO = 40 mA 25 50 75 100 TA, AMBIENT TEMPERATURE (C) 125 I IB , INPUT BIAS CURRENT (mA)
5.0 4.0 3.0 2.0 1.0 0 MC79L05C VO = -5.0 V IO = 40 mA
0
-5.0
-10
-15 -20 -25 -30 Vin, INPUT VOLTAGE (V)
-35
-40
Figure 6. Input Bias Current versus Ambient Temperature
Figure 7. Input Bias Current versus Input Voltage
RJA , THERMAL RESISTANCE JUNCTION-TO-AIR (C/W)
150 130 110 90 70 50 30 RqJA 0 10
P D , POWER DISSIPATION (mW)
PD(max) for TA = +50C
2.8 2.4
1,000
No Heatsink
Graph represents symmetrical layout
2.0 1.6 1.2 0.8 0.4 50
L
100 RqJA = 200C/W PD(max) to 25C = 625 mW 10 25 50 75 100 125 TA, AMBIENT TEMPERATURE (C) 150
2.0 oz. Copper L
3.0 mm
20 30 L, LENGTH OF COPPER (mm)
40
Figure 8. Maximum Average Power Dissipation versus Ambient Temperature (TO-92)
Figure 9. SOP-8 Thermal Resistance and Maximum Power Dissipation versus P.C.B. Copper Length
http://onsemi.com
6
PD, MAXIMUM POWER DISSIPATION (W)
10,000
170
3.2
III I II IIIIIII IIIII
MC79L00, MC79L00A Series
ORDERING INFORMATION
Device MC79L05ABD MC79L05ABDG MC79L05ABDR2 MC79L05ABDR2G MC79L05ABP MC79L05ABPG MC79L05ABPRA MC79L05ABPRAG MC79L05ACD MC79L05ACDG MC79L05ACDR2 MC79L05ACDR2G MC79L05ACP MC79L05ACPG MC79L05ACPRA MC79L05ACPRAG MC79L05ACPRM MC79L05ACPRMG MC79L05ACPRP MC79L05ACPRPG MC79L12ABD MC79L12ABDG MC79L12ABDR2 MC79L12ABDR2G MC79L12ABP MC79L12ABPG MC79L12ABPRA MC79L12ABPRAG -12 V TJ = -40 to +125C TJ = 0 to +125C Nominal Voltage -5.0 V Operating Temperature Range TJ = -40 to +125C Package SOIC-8 SOIC-8 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) Shipping 98 Units / Rail 98 Units / Rail 2500 / Tape & Reel 2500 / Tape & Reel 2000 Units / Bag 2000 Units / Bag 2000 / Tape & Reel 2000 / Tape & Reel 98 Units / Rail 98 Units / Rail 2500 / Tape & Reel 2500 / Tape & Reel 2000 Units / Bag 2000 Units / Bag 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box 98 Units / Rail 98 Units / Rail 2500 / Tape & Reel 2500 / Tape & Reel 2000 Units / Bag 2000 Units / Bag 2000 / Tape & Reel 2000 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
7
MC79L00, MC79L00A Series
ORDERING INFORMATION
Device MC79L12ACD MC79L12ACDG MC79L12ACDR2 MC79L12ACDR2G MC79L12ACP MC79L12ACPG MC79L12ACPRA MC79L12ACPRAG MC79L12ACPRP MC79L12ACPRPG MC79L15ABD MC79L15ABDG MC79L15ABDR2 MC79L15ABDR2G MC79L15ABP MC79L15ABPG MC79L15ABPRP MC79L15ABPRPG MC79L15ACD MC79L15ACDG MC79L15ACDR2 MC79L15ACDR2G MC79L15ACP MC79L15ACPG MC79L15ACPRA MC79L15ACPRAG MC79L15ACPRE MC79L15ACPREG MC79L15ACPRP MC79L15ACPRPG TJ = 0 to +125C -15 V TJ = -40 to +125C Nominal Voltage -12 V Operating Temperature Range TJ = 0 to +125C Package SOIC-8 SOIC-8 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) SOIC-8 SOIC-8 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) Shipping 98 Units / Rail 98 Units / Rail 2500 / Tape & Reel 2500 / Tape & Reel 2000 Units / Bag 2000 Units / Bag 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box 98 Units / Rail 98 Units / Rail 2500 / Tape & Reel 2500 / Tape & Reel 2000 Units / Bag 2000 Units / Bag 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box 98 Units / Rail 98 Units / Rail 2500 / Tape & Reel 2500 / Tape & Reel 2000 Units / Bag 2000 Units / Bag 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Tape & Reel 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
8
MC79L00, MC79L00A Series
ORDERING INFORMATION
Device MC79L18ABPRP MC79L18ABPRPG MC79L18ACP MC79L18ACPG MC79L24ABP MC79L24ABPG MC79L24ACP MC79L24ACPG MC79L24ACPRM MC79L24ACPRMG MC79L24ACPRP MC79L24ACPRPG TJ = 0 to +125C -24 V TJ = -40 to +125C TJ = 0 to +125C Nominal Voltage -18 V Operating Temperature Range TJ = -40 to +125C Package TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) TO-92 TO-92 (Pb-Free) Shipping 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box 2000 Units / Bag 2000 Units / Bag 2000 Units / Bag 2000 Units / Bag 2000 Units / Bag 2000 Units / Bag 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box 2000 / Tape & Ammo Box
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
9
MC79L00, MC79L00A Series
PACKAGE DIMENSIONS
SOIC-8 CASE 751-07 ISSUE AH
-X- A
8 5
B
1 4
S
0.25 (0.010)
M
Y
M
-Y- G C -Z- H D 0.25 (0.010)
M SEATING PLANE
K
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751-01 THRU 751-06 ARE OBSOLETE. NEW STANDARD IS 751-07. MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.33 0.51 1.27 BSC 0.10 0.25 0.19 0.25 0.40 1.27 0_ 8_ 0.25 0.50 5.80 6.20 INCHES MIN MAX 0.189 0.197 0.150 0.157 0.053 0.069 0.013 0.020 0.050 BSC 0.004 0.010 0.007 0.010 0.016 0.050 0_ 8_ 0.010 0.020 0.228 0.244
N
X 45 _
0.10 (0.004)
M
J
ZY
S
X
S
DIM A B C D G H J K M N S
SOLDERING FOOTPRINT*
1.52 0.060
7.0 0.275
4.0 0.155
0.6 0.024
1.270 0.050
SCALE 6:1 mm inches
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
10
MC79L00, MC79L00A Series
PACKAGE DIMENSIONS
TO-92 (TO-226) CASE 29-11 ISSUE AL
A R P L
SEATING PLANE
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.115 --- 0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 2.93 --- 3.43 ---
K
XX G H V
1
D J C SECTION X-X N N
DIM A B C D G H J K L N P R V
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
11
MC79L00/D

▲Up To Search▲

Price & Availability of MC79L0006

	To Download MC79L0006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .